Ghost Immobiliser Installation
Guard your precious possessions from car thieves by putting in a ghost immobiliser. Our TASSA confirmed system safeguards vehicles from hacking, key cloning and vehicle immobiliser bypass.
The system is hidden within your vehicles wiring loom so it's completely invisible to anyone who sees it. It operates by creating the pin code push sequence that is pushed through buttons already present on the steering wheel, door cards and central console.
No circuit cuts
It's not surprising that car owners are concerned about protecting the car they've put so much effort into buying. Traditional security devices, like wheel locks or alarms, can be easily bypassed by thieves. Ghost immobilisers are a extremely effective solution that works in a quiet manner and can't be identified by modern thieves.
Ghost immobilisers is also known as a hidden device, is a device that connects to your vehicle's data network CAN to turn off the engine. It does this without using radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the dash, steering wheel and door panels. This generates an unique pincode only known by you. The code can be changed at any point and can be up to 20 digits long depending on the style you prefer. It comes with an emergency code that you can use in case you forget your PIN.
The ghost immobiliser could also be used to stop relay boxes from transferring the signal of your car's key from inside your home, which could unlock the doors and start the vehicle. It can also block sophisticated methods to steal your vehicle, including OBD port hacking. The device is small, weatherproof and difficult to see. It's also hard to alter.
Another benefit of the ghost immobiliser is that it can be put in your car without any permanent marks. This makes it perfect for those who are planning to resell their car in the near future. It's also quicker and simpler to install as compared to a factory-fitted unit.
The Autowatch Ghost, a groundbreaking new-generation device, prevents thefts from cars that are not connected to the CAN network of a vehicle and using the existing buttons to generate an unique PIN code. It is a devious device that can be set up without removing wires and does not require any additional key fobs. It also connects to the original ECU of the vehicle, thus preventing thieves from using a different key. This system is TASSA certified and is connected to an International Security Register, allowing owners peace of mind knowing that their vehicles are safe from theft.
No RF scanning
You will want to protect your vehicle from theft if you have spent an enormous amount of money and spent a lot of time customizing it. Installing an immobiliser is one of the best ways to stop theft. It will stop your vehicle from beginning until you enter the unique code. You can create a 20-digit PIN by pressing the buttons on your dashboard or the steering wheel. This will ensure that only you are able to drive your car. It is also possible to set up a service or valet mode that allows you to start your car for a short period without entering the PIN. This allows your technician to work on your car without your presence. This is a great option for those who wish to cut down on time and make their lives easier.
A ghost immobiliser is a next-generation device that connects to your vehicle's CAN data network and utilizes the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to blend in with the vehicle's design, as it doesn't emit any sound or LED indicators. It can be placed anywhere on your vehicle without affecting the aesthetics.
ghost 2 immobiliser fitting near me is TASSA approved and can reduce the cost of insurance. It also comes with a tracking function that can track your vehicle even if it's been stolen. This is great when you own a unique, expensive vehicle that you've put time and effort to customize.
The Autowatch Ghost can be used together with an iPhone application that allows you to remotely start your vehicle in the event you have forgotten your PIN or are not able to enter the vehicle for some reason. This feature is great for those who need to do some errands, or pick up your children and do not want to risk having someone else drive your car. It's also useful when you have to take your vehicle in for servicing or repair.
Another advantage of the Ghost is that it is unable to transmit or detect radio frequency signals, making it unnoticeable to thieves who use RF scanning or code grabbing technology. It can also safeguard your car from key duplicates, ECU swapping and other usual methods of car theft.
No key cloning
Ghost immobilisers are an excellent method to protect top-end vehicles and stop key cloning. They prevent your car from being started without a PIN code being entered with the standard key fob. This makes it very difficult for thieves to steal the vehicle, and could deter them from attempting. This is an especially good option if you've invested a lot of time and money in making your vehicle unique or own a unique or expensive model.
The immobilisers are connected to the vehicle's onboard CAN network and are completely hidden meaning that there is no indication of its presence in the vehicle. It is also impossible for a burglar to locate the device using radio frequency scanning or code technology for grabbing. This means that a burglar would have to spend more time to take your vehicle.
To get around the system, a thief must know the unique pin code and the location of the Ghost. The pin code is exclusive to you and you can change it as often as needed. The pin code is simple to remember, but mathematically unattainable for someone else to understand. In addition, the engineer will have provided you with an emergency PIN code override in case you ever forget the pin.
The Ghost CAN Bus immobiliser can be easily installed anywhere on your vehicle. It works with all vehicles and is completely customizable to match the look of your vehicle. It is also very easy to use and is affordable. The device can be transferred to a different vehicle, as long as it is compatible with the new vehicle.
The immobiliser for the CAN bus is compatible with many other security features. It can, for example detect damage to the vehicle and alert the owner. It can also stop the engine if the car is damaged. The system also protects your vehicle from key cloning and hacking. It can also detect vibrations and contact with the vehicle. Additionally, it will alert the owner if the vehicle has been moved.
No OBD port hacking
Ghost employs an immobiliser that is hidden and connected to your vehicle's CAN data network that prevents thieves from gaining access to your vehicle to disable the alarm, deactivate the key fob and code new keys. This technology is an enormous improvement over the traditional methods that have been used by thieves in the past to steal your vehicle. The CAN data network also means that your system won't be affected by disconnecting or change your battery.
The Autowatch Ghost is the first CAN bus immobiliser aftermarket in the world, protects against key-cloning, hacking, and replica car theft. It doesn't use LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console, and door panels.
Modern thieves can utilize diagnostics to identify circuit breaks on your vehicle. They can bypass immobilisers which require a large amount of wiring or are integrated in the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not able to be detected by professional diagnosis tools. It can even be installed on vehicles equipped with anti-theft systems.
A Ghost immobiliser has another major advantage: your vehicle will only be started by someone who knows your PIN code and physically has access to your vehicle. This is a major advantage over security systems that are able to be bypassed using cable tampering, a screwdriver or the utilisation of a universal remote controller.
If you forget your PIN, you can easily reset it with the emergency PIN override function on a mobile phone or computer. This is helpful when you want to start your car when it's been left in a garage or at valet parking.
The Autowatch Ghost 2 is the latest generation of the product, and is affixed to insurance by TASSA when installed by one of our authorized installers. It comes with an RFID fingerprint system that can identify parts that are not in use that allow for the return of stolen items in the event that they are found. It can also be set to'service mode', which allows the engine to be started when your vehicle is in a garage, or with valet parking, but you will need to enter your PIN again to exit the vehicle.